Copyright © All rights reserved. Brian Law Design
Share via e-mail Print
Brian Law’s        Woodenclocks

Clock 33 - Epicyclic Gear Clock

Clock 33 -Has been designed to be made using almost all, Laser or CNC cut components. It is based on an old clock designed by William Strutt, in about 1830, and it has several interesting features. The foremost of these is the large Epicyclic gear drive featuring gear teeth on inner and outer parts of the ring, resulting in a rather unique design.The clock was very difficult to make at the time and few were ever actually produced, so, I have adapted the original design so that it can be hung on the wall and be weight driven instead of the original spring drive. This and the adoption of conventional gearing to achieve the 12:1 ratio for the hour hand, instead of the Ferguson Paradox gearing used on the original has made it much more practicable proposition for a wooden clock design.The large Epicyclic gear causes a few problems for the builder as it needs to be held accurately in position on the shaft so that it engages with its Planetary gear and the stationary Sun gear in the centre. To ensure this will happen all the gears on the main shaft have machined bushes to mount the gears on squarely and securely so a lathe is going to be needed to make these parts.

Although this is not really a clock for the beginner it is actually a great project if you are an experienced engineer and want a quick build and a satisfying result.

I don’t normally use sheet materials for the clocks but in this case with the large Epicyclic gear required to be as flat and distortion free as possible, sheet materials, MDF, Plywood or Perspex are actually ideal.

If you would like to purchase the DXF or DWG files for CNC machining and the full unrestricted Drawings in PDF format for use with a scroll saw then go to the BUY NOW button.

Drawings for this clock in PDF format can be downloaded here, These free files are low resolution and not to scale and only a sample of the full set that comes in the paid for version. Clicking to the left here will download the PDF file directly to your browser, may take a few moments so please be patient.

A sample from the DXF file is shown when you click on the arrow .The file is purposely low resolution, with no vector data.The actual files purchased above are included on one large sheet so that they may be directly loaded into your CAM program

Clock 33 Detail Drawings - PR.pdf

To print only a single item of the drawing to scale using Adobe Acrobat Reader,  do the following

Go to  Edit  then click on   Take a snapshot

Move the cursor to the top left of the item you want to print and hold down the left mouse button whilst you drag a box around the item.  The inside of the box turns blue and you can now go to  File and then click on  Print  . This brings up the print dialogue, make sure Selected graphic  is selected and that the Page scaling is set to  Actual Size, and Print in grey is ticked,then click on  OK,  .As long as your printer is connected you will have printed the item at size.Do this for each item you want to cut out.


DXF files, and the IGS and STP files that can be used with your CNC machine can be downloaded here for $26 You also get the unrestricted version of the PDF files that can be printed at full size.

Clock-33-Epicyclic--Renders-01.jpg Clock-33-Epicyclic--Renders-01.jpg Clock-33-Epicyclic--Renders-03.jpg Clock-33-Epicyclic--Renders-02.jpg Clock-33-Epicyclic--Renders-04.jpg

Details of the materials and equipment needed to build this clock, along with Hints and Tips

Equipment and Materials hints and Tips-Clock 33-iss1.pdf

Instructions for assembling the clock components.

Clock 33 - Instructions-iss1.pdf Clock-33-Epicyclic--Renders-05.jpg Clock-33-Profile-Cuts-1-pr.jpg Clock-33-Epicyclic--Renders-06.jpg