Share on Facebook Share on Twitter Share via e-mail Print
Brian Law’s        Woodenclocks
Share on Google Bookmarks Share on Stumble Upon Share on Reddit Share on Tumblr
Copyright © All rights reserved. Brian Law Design

Grasshopper Escapement

The Grasshopper Escapement shown here was designed as a stand alone mechanism to prove out the design, and as such have additional parts to support it and to enable it to function.

These parts namely the stand and the pendulum and even the Escapement wheel will not necessarily be required if you use the design within your own clock design .I have used a short pendulum of 248 mm length to give a 2 second oscillation. This works for the compact design shown here but would probably use a longer 1000 mm pendulum for your own clock. The longer pendulum with the 30 tooth escapement wheel would then give you 1 revolution of that wheel per 60 seconds.

The size of the small weight is very much up to you, and is there to drive the escapement and will vary with different constructions. Two versions of the design are available, a compact conventional arrangement and a more elegant variation.

If you would like to purchase the DXF, DWG,STP and IGS files for CNC machining and the full unrestricted Drawings in PDF format for use with a scroll saw then go to the BUY NOW button.

Drawings for this clock in PDF format can be downloaded here, These free files are restricted so that you can only view them on screen but not print them. Clicking to the left here will download the PDF file directly to your browser, may take a few moments so please be patient.

A sample from the DXF/DWG files is shown when you Roll Over the arrow .The actual files purchased above are included on one large sheet so that they may be directly loaded into your CAM program

To print only a single item of the drawing to scale using Adobe Acrobat Reader,  do the following

Go to  Edit  then click on   Take a snapshot

Move the cursor to the top left of the item you want to print and hold down the left mouse button whilst you drag a box around the item.  The inside of the box turns blue and you can now go to  File and then click on  Print  . This brings up the print dialogue, make sure Selected graphic  is selected and that the Page scaling is set to  None  and the click on  OK,  .As long as your printer is connected you will have printed the item at size.Do this for each item you want to cut out.

DXF, DWG 2D files, and the IGS and STP files that can be used with your CNC machine can be downloaded here for $20 You also get the unrestricted version of the PDF files that can be printed at full size.

Grasshopper1-2 Drawings-pr.pdf PrinterTips PayPal: Buy Grasshopper-Files

Grasshopper Escapement.

Video now available here

Video of Grasshopper prototype.

Video of Grasshopper 1- Stop Motion

Video of Grasshopper 2- Stop Motion

Video from Alan Martin

Grasshopper-1-p1.jpg Grasshopper-1-p3.jpg Grasshopper2-p1.jpg Grasshopper-1-p2.jpg Grasshopper-1-p4.jpg Grasshopper2-p2.jpg